Compliance

ISO 9001

PEAK Scientific is an ISO 9001:2015 accredited organization, covering the design, manufacture and servicing of laboratory gas generators. Recognized in over 150 countries, ISO 9001:2015 certification illustrates our dedication and care to our products and service around the globe. Download our Certificate of Registration.

PEAK Scientific is also compliant with the Health and Safety at Work etc. Act 1974, see our contractors' handbook.

ISO 9001:2015 logo

CSA Mark

We view customer safety to be extremely important at PEAK Scientific and so many products within the PEAK Scientific product range, have been developed and tested to bear the CSA intext mark. The CSA mark offers peace of mind to our customers around the world that our products have been tested and approved by a third party. To achieve this accreditation all our products are certified to 61010-1, the applicable electrical safety standard (LVD) for laboratory equipment.

All our CSA certification logo badged products comply with both North American and Canadian Standards and are all tested/approved under the IECEE CB scheme. In addition, all CSA marked products are also compliant to the Federal Communications Commission standards for EMC interference, indicated with the FCC Certification logo mark.

The CSA Authority conduct a quarterly Factory Inspection to ensure compliance of our CSA marked products is maintained.

All approval marks can be found on the product and are reflected in the associated product brochures.

CSA Certification logo

CE Mark

All PEAK Scientific lab gas generators are designed, built and tested to comply with the applicable CE directives. As such, all products comply to the current EN 61326-1 (EMC) and EN 61010-1 (LVD) standards for electrical laboratory equipment. The CE marking is a legal requirement for product sold in the European Union and ensures that all of our products are fully compliant with all applicable European Directives and Regulations.

CE Certification logo

RoHS Statement of Compliance

The European RoHS 2 (Restriction of Hazardous Substances) Directive 2011/65/EU aims to reduce the use of hazardous materials within EEE (Electrical & Electronic Equipment) products.

The restricted substances are:
Lead <0.1%
Mercury <0.1%
Cadmium <0.01%
Hexavalent Chromium <0.1%
Polybrominated biphenyls (PBB) <0.1%
Polybrominated diphenyl ethers (PBDE) <0.1%

PEAK Scientific has developed all reasonable ‘due diligence’ controls, to ensure that our products comply with the principles and requirements of this directive. Similar directives in the United States and China, for example, have also been captured within this programme.

Where a specific certificate of compliance is required, this can be requested, on a product serial number basis, from PEAK Scientific Instruments Ltd, by contacting us though marketing@peakscientific.com.

WEEE Statement of Compliance

The WEEE (Waste of Electrical & Electronic Equipment) Directive 2012/19/EU aims to reduce the impact upon the environment, from disposal of certain types of equipment. It requires producers to implement controls, that equipment they produce is correctly disposed of, following the end of its useful life.

PEAK Scientific fully complies with its obligations towards this important legislation. Our Registration number for this scheme is WEE/FJ0116XU. These obligations refer to all electrical equipment that has been dispatched by us from 1st July, 2007, within the United Kingdom. As part of our compliance towards this, we have placed the management of this disposal, with the B2B Compliance Scheme. They can be contacted directly on 01691-676124, or by visiting their website on www.b2bcompliance.org.uk.

Conflict Minerals Statement of Compliance

View our conflict minerals statement of compliance

Australia and New Zealand Regulatory compliance mark (RCM) registered with ACMA:

PEAK Scientific Gas Generators are the only gas generators currently registered with the ACMA to apply the RCM label in Australia and New Zealand.

The Australian Communication and Media Authority (ACMA) and the Electrical Regulatory Authorities Councils (ERAC) of Australia requires a supplier to apply a compliance label to a product, before supplying it to the Australian market.

For all ACMA regulatory arrangements, the compliance label is the Regulatory Compliance Mark (RCM). All PEAK Scientific gas generation products are registered on the national database and complied with all regulatory requirements including Declaration of Conformity and compliance records.

Environmental Policy

View our environmental policy

Subscribe to our newsletter for regular product updates, news and insights.